Posts Tagged ‘Dragon’

Yet Another Bloody Sword…

Thursday, October 2nd, 2008

And no, I am not having a bad day, and my language is just fine thank you very much.

My heading refers, quite literally, to another red sword that looks for all the world like the last wielder ran their last opponent clean through with it, withdrew the weapon, threw the sword unceremoniously into the growing pool of the vanquished enemy’s blood, and just walked away…

Dragon Talon Fantasy Sword

Dragon Talon Fantasy Sword

[Click image to view full size]

So this, my friends, is the Dragon Talon Fantasy sword. And as fantasy swords go, well… I like it. It’s another one of those designs that doesn’t try to do too much, and succeeds at doing what it’s trying to do very well. That’s not to say it isn’t devoid of gimmicks. It is a “fantasy” sword after all.

And I’ve found, much to my frequent chagrin, that the word “Fantasy” in front of any weapon is usually license for the designer to engage in all manner of obscene atrocities in their design. But as gimmicks go, this sword is actually many rungs above the normal level of sacrilege I see committed in the name of “Fantasy design”.

This sword, true to it’s name, is every bit designed around the “Dragon Talon” motif. The Pommel of the sword features a set of two dragons talons, curving towards each other. Above that we have the grip, which is spiral wrapped in what looks a like a soft faux leather material. Not the best grip finish by any means, but for a wall hanger it is probably survivable.

The guard is where things begin to get interesting. True to form, the guard consists of a similar set of inward curving dragon claws, much like the pommel, but with a twist. For herein lies our gimmick of the day: a set of two small dragon headed daggers that are set into small sockets opposite each other, at the base of the grip.

These small daggers can be pulled out and used independently. I like the design of the dragon heads in them, and while they aren’t particularly large, they are very reminiscent of the Japanese practice of placing small knives, called kogatana, into pockets in the side of the saya (sheaths) of their swords.

These are even smaller than those, and might be better described as finger knives, but you could probably get a comparable level of functionality out of them, were anyone silly enough to attempt to use this sword for any practical purposes… 🙂

Anyway back to the blade. And what a distinctive blade it is! A simple, straight line, tapering blade profile, with a short ricasso, and a spear tip, painted from hilt to tip, in a deep blood red hue that transitions to an almost reddish black oxide color at the edge and tip. A rare but welcome change from the usually flashy steel I see so often.

Overall a nice design. I would not trust the grip bindings to hold up to any kind of use, nor for the little sub blades to stay in place under duress, but otherwise, I like the design and if, for some hypothetical reason, I had select any one given “Fantasy” blade to be run through with, this would be in my top 5…

What? No. No, at the moment, I can’t think of any realistic scenarios where I would get to choose the preferred weapon to be run through with. Nor, for that matter, why I would be letting someone run me through at all. But that’s just the way my mind works.

OK, I have issues, alright? Let’s just leave it at that. OK? Thank you…

Dragon Talon Fantasy Sword – [True Swords]

Freaky Wings of Blade…

Monday, July 14th, 2008

I posted recently about the various niches in “bladed art”, and thought this would be an interesting addition to the list of things that get a hearty “What in the name of…” from yours truly:

The Night Glider

The Night Glider - Click to view full size

Now I found this… creature… on an Australian website while looking for something else, but it definitely caught my eye. Now I know I had mentioned before that there were quite a few crossover bladed art pieces, but this is something new…

The Night Glider

The Night Glider - Click to view full size

The Night Glider looks to be a cross between a dragon, a greyhound, and a vengeful revenant… Except it’s limbs have been replaced by rather substantial blades. It’s arms are a set of outstretched dragon like wings, tipped with a large fore-to-aft curving blade, with a smaller sub-blade protruding backwards from where the traditional thumb joint would normally be in such winged marvels.

The Night Glider - Click for full size

The Night Glider - Click to view full size

It’s upper body and head are suitably revenant like, looking like an incompletely (but symmetrically), decomposed skeleton brought back to do some… Errr unsavory task. The back half is an interesting mix of bony canine (hence the greyhound reference) and dragon, complete with pointy tail. What’s even more striking is that the rear paws of this particular canine have been replaced with a set of rather intimidating blades, which kinda raises the thorny philosophical question… How does it land?

The Night Glider

The Night Glider

In fact, given how much of it’s extended skeleton has been converted to blades, albeit unsharpened ones, I dare say this unfortunate chap must actually fly (or glide…) continuously, 24 hours a day, 7 days a week , 365 days a year, as it appears to be ill equipped for any kind of terrestrially based activity… That’s assuming it could actually fly with metal wings.

Actually, now that I think about it, why not? It worked for Archangel didn’t it? All it would have to worry about would be sticking the landing. Or not sticking the landing. Depending on how you look at it.

Ok, I’ll stop rambling now…

An interesting double bladed dragon dealio…

Tuesday, May 13th, 2008

Today, I just so happened to run into a double bladed weapon that might actually not be bad…

Dragon Mutilator

Dragon Mutilator

[view full size]

Ok, yes, the knife designers went the unimaginative route and decided to go with a dragon theme. Whoopty doo. Let’s move on… Disregarding that now all too common dragon faux pas, we really have what I’d consider a creative design here. At first glance it appears to be a single weapon with two blades, and a spiked and bladed finger guard running over your precious phalanges.

The blades are a fairly curvy single edged dagger like design, with a dragon flame motif, which runs down into a dragon head transition piece that sits between the blade and the black cord wrapped grip. However there is an interesting surprise. It is in fact, it appears that this is actually constructed of two single knives, that fit together back to back, (Or actually side by side), to form this rather menacing weapon.

From what I can see, it looks like the pommels of each knife is specially designed with a ledge that fits into a recess behind the blade/grip transition area, being locked on at least one side by a special latch built into the ledge on the pommel of one of the blades.

Interestingly though, I could not find any indication of a similar latch on the other blade, so it looks like the knives are not mirror images of each other, but rather work as a primary/secondary pair. Definitely not the way I would have done it. But then I’m a fanatic about symmetry.

The from the pics, I’d guess that the primary blade, which has no latch, also gets the center spike in on the guard, as this would be the easiest way to split it. The secondary blade, would then be the one with the locking latch built into pommel, and gets short changed a spike…

Altogether not a bad idea, although i would definitely have gone for absolute symmetry, with latches on the pommels of both blades (for strength), an even number of spikes (so they could be evenly divided between each blade and therefore identical) And would perhaps have eliminated the oh, so clichĂ©d dragon motif…

But that’s just me…

Dragon Mutilator – [Collectors Edge]

Dragon Slayers Shouldn’t Have Dragons…

Monday, April 21st, 2008

One of the unusual habits of modern day blade designers I find a bit puzzling is their penchant for questionable weapon names. Take this set of swords for example:

Dragon Slayers

Dragon Slayer 41" Dragon Slayer 23In

[view full size] [view full size]

Now I’m not saying these aren’t cool looking swords. Because they are. Albeit perhaps a little gaudy for my taste around the cross guard area. But the point is, What we are looking at are a set of dragon themed swords, called… Dragon Slayers. Yes. Seems innocent enough, right? Except that, in the face of tradition, this name makes no sense. I’m making no sense? Ok, ok let me explain.

Traditionally, any special sword design or name would serve as an obvious indicator of either it’s use, abilities, or as a tribute to something. Look at the LOTR for example. Every weapon had a name. And each name had a significance in relation to it’s history or purpose.

Let’s take, for instance, Gandalfs Sword, Glamdring. AKA “Foe Hammer”, “Beater”, and in more contemporary works “Goblin Cleaver”. Pretty self explanatory what it’s supposed to be for. And then there are sword whose design is intended to pay homage to a creature of strength and honor, like, for instance, the Japanese Dragon Katana, where the Dragon is an honored good luck charm of strength and power, whose design has been integrated into the grip.

This weapon, on the other hand, seems confused. The design itself is actually fine, the idea of a black scimitar with a rearing dragon cross guard, black grip and dragon head pommel is ok, (though perhaps too many dragon heads for my taste) but then naming it the “Dragon Slayer”? Seems a bit contradictory to me. Either you are honoring the dragon by designing a sword around it, or you design the sword to slay it… Not both.

Perhaps I am confused about the sword naming rules, (or maybe there aren’t any…), but personally I probably would have gone for a more Dragon friendly name…

Dragon Slayers – [True Swords]

A Uniquely Ornate Dragon Sword…

Sunday, March 30th, 2008

Without a doubt, I’ve blogged about my fair share of Dragon swords in the past.  Some were deserving of the title, but most were not. But every now and then I run into a design that is unique and exceptional. And today I just so happen to have run across such a weapon.

Ornate Medieval Dragon Sword

Ornate Medieval Dragon Sword
[view full size]

Now this sword is unique in more than a couple respects. Take the blade for instance. It seems to be a cross between a Japanese and European design. It is not quite as curved as a Japanese Katana, however it doesn’t appear to be completely straight either. It carries a three quarter length fuller, without which I might easily have taken this blade for a Japanese make, based on the profile of the blade point, which looks very stereotypically Japanese. If I had to classify it I’d say it was a Japanese saber, though I’d ask that you not quote me on that… 🙂

But an even more interesting aspect of the design is how the dragon theme is implemented. The scabbard employs the liberal use of a dragon coiled around the sheath as the scabbard end cap and the attachment points for chain belt hanger. Bu what is perhaps the most interesting feature on the sword is the dragon hilt design.

Unlike most other dragon swords that feature a dragon “motif” the hilt of this weapon makes extensive use of a dragon’s anatomy, rearranging it to fit the practical needs of the hilts design, rather than simply decorating a traditional design with a dragon motif.

On this weapon, just below the ricasso, you can see that the dragons wings and forelimbs have been extended to form a guard, with the dragon facing the direction of the blade. In fact the blade seems to spring from the dragons chest. Continuing down you can see that the body of the dragon is also the grip, and not content to stop there, the designers curved the ridged scaly tail of the dragon back forwards to over the grip, stopping  just in front of the outstretched front limbs to form a knuckle guard.

While I will admit to having seen a similar knife arrangement with the blade coming out of the dragons mouth, and the front limbs forming a crude guard, I don’t think I have ever seen this done in combination with outspread dragons wings forming a large guard in this way before.

All and all, quite an engaging design, worthy of the Dragon moniker…

Ornate Medieval Dragon Sword – [Tulip Collectibles]

Log In

Please leave these two fields as-is:

Protected by Invisible Defender. Showed 403 to 159,325 bad guys.

Your Weapon Sir?
The Raiders Almanac
January 2018
M T W T F S S
« Sep    
1234567
891011121314
15161718192021
22232425262728
293031  
Surf the Sands of Time:
Phyreblades Site of the Month!