Posts Tagged ‘Double Bladed’

The Midnight Dragon Corps…

Sunday, November 2nd, 2008

So a while back I ran across a rather interesting polearm:

Midnight Dragon Blade

Midnight Dragon Blade

[click to view full size]

Yes. The Midnight Dragon Blade. Dunno if it was intended for hunting dragons at midnight, or is the signature weapon of the secret sect called the Midnight Dragon Corps. Personally I’d much prefer the latter. anyway, I haven’t blogged about a polearm in a while, so when found this while looking through my archives, I thought it would make for an interesting post. Expecially since this is of a rather unusual design.

Like your average polearm, this one has a suitably lengthy shaft, in sweet blackness, tipped with a silver pommel cap sporting a design I had a hard time placing. On one hand it looks like a chain mail pattern covering some kind of flowerbud, and on the other, it could be scales on the outstretched talons of a dragon. Hm. My design-fu is weak today…

Either way, it thought it was cool. Three quarters of the way up the shaft we have a silver band, and just below the head, a dragon is depicted wrapped around the shaft, looking up towards the head. Now the head of this polearm is where it gets interesting.

The flat black head of this polearm is an eclectic collection of curves, arcs, and points, which I normally love to see, except in this case, there does not seem to be much purpose behind the arrangement. However, just for giggles, I’m going to try see if I can classify it based on it’s general features. 🙂

On one side we have what looks like the outstretched wing of a black dragon, which I thought looked very cool. It’s rearward orientation would suggest that this could be used in a bill hook fashion, however billhooks generally did not have an additional large blade on the opposite side as an accoutrement.

Opposite the wing hook we have a large beautiful crescent of black steel. Almost looks like an axe head, which would put it in Bardiche or pole cleaver category, except pole cleavers are usually single edged. Not to mention the little sub crescent in the top of the curve, besides being really annoying, really kills the axe head shape. Which is possibly why I find it annoying. But I digress.

There is also no real forward point to speak of, the top of the axe head curves too far in to make a good thrusting point, so this would probably be best used as a hacking, hooking or or cutting weapon. So we are left with the generic “random blade on a long stick” polearm, AKA – the Halberd.

Halberds perhaps come in the widest variety of blade shapes and sizes, but to be honest, they also generally all have a good useable thrusting point as well, which this doesn’t have. However, since there are versions of polearms with bill hooks on one side and large axe like blades on the other, I’m gonna stick with that, as two out of three isn’t bad.

Meh. Who am I kidding… This thing is unclassifiable. It’s a fantasy weapon. They threw me for a loop by omitting “fantasy” from the name, but the “Dragon” in the nomenclature should have given it away. You’d think i would have figured all this out by now. Live an learn I guess…

It’s still a cool looking polearm, though… 🙂

Midnight Dragon Blade – [King of Swords]

In the future, axes will become art…

Wednesday, September 3rd, 2008

Today we have another entry into the “I traveled to the future and all I got was this lousy “I got beat by a wussy futuristic ugly stick” t-shirt…” category:

Futuristic Oval Axe

Futuristic Oval Axe

Yeah. A futuristic axe. Uh huh. And not just a futuristic but a futuristic oval axe… Oooohh, Aaaaahhh… Pthththh… Yep. Where to start… Ah, yes. With the head. Or whatever it is.

As axes go, well… it’s… something. It’s got an “oval” axe head, very much reminiscent of a traditional double bit axe, except with an ovoid blade, some weird cut outs and some funky trim. But despite it’s double edged appearance, it’s hard to tell whether this design was intended to be single or double edged, as the rear edge is shrouded by the pivot arm.

Yes. You read correctly. I said “pivot arm”. Why? because this axe head is mounted not to a shaft, but to a rotating arm, via a single central bolt. Why? Well, so that it can pivot down to one side of the shaft, of course. Why the pivot functionality? Errrmmm… Well… I dunno.

Maybe to enable it to be used as a replacement prosthetic arm for a battle bot? A small Transformer maybe? In fact, now that I think about it, I’d be willing to bet this whole design concept was a Decepticons doing… Sneaky bots, them… But I digress.

So this pivot arm is then mounted to the nifty, ergonomic looking grip, via a similar single pivot bolt arrangement. Having not had the pleasure of handling this, I can’t comment as to the efficacy of the locking mechanism, but based on the visible mechanics, I’m not particularly optimistic about it’s mechanical strength.

However not content with that iffyness, this grip has two added ovoid blades (more crescent shaped actually), one at the top, just beneath the head, above the pivot point, and one at the pommel, with the bottom one attached with yet more pivot bolt madness.

I have actually run into this design on several occasions over the years. And I can finally give voice to the thought that ran through my head every time I saw it:

WHAT THE…!!?!?

Why that particular response? Well, here’s my thing. In my admittedly neurotic mind, axes have traditionally been the brawn of the blade world. Big solid heavy heads, strong shafts, strong utility edge grinds, etc. They are not about finesse. When you swing an axe, it’s supposed to be with authority.

With this “futuristic” design, if you were to ever swing it, not only would you have to worry about the pivot locking mechanism holding, but also the fact that the whole thing is held together by two relatively puny bolts.

A locking mechanism and/or bolts that might gain an intense aversion to such treatment and decide to just pack it in and go home. Without the customary two weeks notice. Yeah. With something like this I wouldn’t be comfortable swinging it with any more authority than a chihuahua barking at a hungry Rottweiler.

That’s not to say I entirely dislike it. I like the talon-like shape of the grip blades. And notwithstanding the gimping of the rear edge with the cutouts and shrouding and whatnot, the head has some decent aesthetics.

And though I could do without it, I really don’t mind the over-the-top pseudo futuristic garbage people keep cranking out. (I mean seriously, from these excessively busy designs you’d think the designers think our future generations will all suffer from a serious global epidemic of ADD… Wait… Whut?)

But sometimes the sheer level of functional dysfunction I see in some of these designs really makes me wonder whether it’s really that hard for people to make functionally feasible and mechanically sound art. Perhaps I ask too much. Maybe I’m just an obsessive compulsive pedant who likes to rant about stupid blades. Perhaps I’m just insane.

It’s probably all of the above…

Futuristic Oval Axe thingy – [Anime Castle]

An Evil Push Dagger of Doom!

Saturday, August 30th, 2008

I’ve posted a relatively fair share of what I consider “battle blades”, but today I thought I’d show you a rather interesting blade, one that, contrary to the other extravagant steel art I’ve been blogging about, looks like it would actually be rather wickedly effective. Yep. I’d like you to meet… the Interceptor:

Interceptor

Interceptor

Now that, my friends is evil. My kind of evil. Edges and curves and points. Oh My! :-}

Ok, back to intercepting. This appears to be a weapon modeled after a push dagger, except based on the brass knuckles form factor we first ran into in Tom Andersons Pantera Claws. Essentially, it’s a pair of wood scaled brass knuckles, (in steel) with a set of blades attached forward and to either side of the knuckles.

In essence, a push dagger. With a little extra. And a mean little push dagger it is. Well, perhaps not so little. It is significantly larger than any traditional push dagger, but in this case, this is not an unwelcome characteristic. Out front, we have two large forward blades, with forward pointing tips and outward facing edges.

Tom Anderson - Vicious Quad Edge Interceptor

Tom Anderson - Vicious Quad Edge Interceptor

On either side of the finger voids, we have one additional blade, edges facing out. All four blades have a little semicircular divot which seems to serve no other purpose than aesthetic style. Not the kind of thing I’d do, but they doesn’t seem to create any particularly bad weaknesses, so I’ll move on. The blade seems to be attached via a set of small screws, which might be the only major weakness I can see.

But beyond that, it seems like it would be a genuinely effective tool. Clearly, as a punch dagger, this would be killer (excuse the pun), no questions. The side blades, on the other hand, might see some limited effectiveness if the blade was used in a side hammer fist, though I’d probably not want to try to cut anything like that with the forward blades, unless you really won’t need the use of your fingers afterwards.

But when all is said and done, it’s sheer wickedness… Well, what more can I say… Look at it yourself and form your own conclusions… 😉

Interceptor – Tom Anderson – [True Swords]/[eBlade Store]

An interesting double bladed dragon dealio…

Tuesday, May 13th, 2008

Today, I just so happened to run into a double bladed weapon that might actually not be bad…

Dragon Mutilator

Dragon Mutilator

[view full size]

Ok, yes, the knife designers went the unimaginative route and decided to go with a dragon theme. Whoopty doo. Let’s move on… Disregarding that now all too common dragon faux pas, we really have what I’d consider a creative design here. At first glance it appears to be a single weapon with two blades, and a spiked and bladed finger guard running over your precious phalanges.

The blades are a fairly curvy single edged dagger like design, with a dragon flame motif, which runs down into a dragon head transition piece that sits between the blade and the black cord wrapped grip. However there is an interesting surprise. It is in fact, it appears that this is actually constructed of two single knives, that fit together back to back, (Or actually side by side), to form this rather menacing weapon.

From what I can see, it looks like the pommels of each knife is specially designed with a ledge that fits into a recess behind the blade/grip transition area, being locked on at least one side by a special latch built into the ledge on the pommel of one of the blades.

Interestingly though, I could not find any indication of a similar latch on the other blade, so it looks like the knives are not mirror images of each other, but rather work as a primary/secondary pair. Definitely not the way I would have done it. But then I’m a fanatic about symmetry.

The from the pics, I’d guess that the primary blade, which has no latch, also gets the center spike in on the guard, as this would be the easiest way to split it. The secondary blade, would then be the one with the locking latch built into pommel, and gets short changed a spike…

Altogether not a bad idea, although i would definitely have gone for absolute symmetry, with latches on the pommels of both blades (for strength), an even number of spikes (so they could be evenly divided between each blade and therefore identical) And would perhaps have eliminated the oh, so clichéd dragon motif…

But that’s just me…

Dragon Mutilator – [Collectors Edge]

A Mean Little Battle Axe…

Thursday, April 3rd, 2008

OK, so the title is a little misleading, since this is not really what one could call a “little” battle axe. Quite the opposite. Today we will be looking at a dark and impressive D-BAX (double bladed battle axe):

Fantasy D-BAX

Double Bladed Battle Axe
[view full size]

Yeah… sweet not-so-little weapon innit… Now this axe caught my attention for a couple of reasons. The first being it’s aesthetics. Now it’s no secret how much I like dark weapons, but it’s also nice to see a weapon with very tastefully done silver or chrome accents. And on this weapon these polished accents have been very well done.

Sitting between the black leather wrapped grips, we have sections of polished steel on pommel, in the middle of the shaft, between the grips and just before the head. Personally I would have been just as happy with slightly less polished steel and more black, but it is still quite eye catching as it is.

And then theres the blade profile. I love the contours of the head on this axe. The top points of the blades are set just so much wider than the bottom points that it almost looks like the wings of a bat. In addition, that shape would give it that much more utility as a battlefield weapon, as the points of each blades would actually be in a better position for thrusting, should it ever be required.

Curiously, on this axe, the edge takes a slight inward radius towards the bottom of the blades. Can’t think of any reason other than cosmetics for it’s presence, but it does not seem like it would do any harm, so I can’t really complain about it. And of course my critique would not be complete if I didn’t mention the impressive black blades on this thing, and the inordinately large edge grind that sets it off. Very nice!

Certainly a fairly mean looking axe. My favorite kind. 😉

Double Bladed Battle Axe – [By The Sword]

Log In

Please leave these two fields as-is:

Protected by Invisible Defender. Showed 403 to 159,322 bad guys.

Your Weapon Sir?
The Raiders Almanac
December 2017
M T W T F S S
« Sep    
 123
45678910
11121314151617
18192021222324
25262728293031
Surf the Sands of Time:
Phyreblades Site of the Month!