The Realm of the Dark Blade

And just in case you are wondering, no, I am not talking about a tool kit for little ninjas. Though, as a side note, I am sure they do exist and are just as deadly as their larger counterparts. But no, they will not be the topic of today’s post. Rather I will be talking about ninja weapons. I’m sure you have all seen those gazillion piece ninja sword sets, that have hira shuriken in the guards, small knives, throwing spikes, and blinding powder in the saya, etc. etc, etc. Well, today I ran into a small scale version of that kit. the Ninja Battle Tanto set:

Ninja Tanto Battle Set

Yessiree, everything the aspiring ninja might need for a little clandestine action, all in an ultra mobile, compact form factor. Now technically, I think it is inaccurate to call this a “battle” set, since to my knowledge, Ninjas are not traditionally known to engage in “battle” in a traditional sense. They were more the special forces/guerrilla type, experts in asymmetrical warfare. So I prefer to call this the Ninja “tool kit”

And it’s got lots of cool tools. in addition to the cool little jet black, full tang tanto, with a push dagger hidden in the pommel, it’s got a sweet little sheath that holds three bo shuriken, and a small compartment for Tashibishi (aka Caltrops) that could be thrown on the ground to dissuade any pursuers eager to expedite your demise at the completion of a mission.

To be honest, I’m not a big fan of excessive amalgamated accessorization. Putting too many things in one place can cause problems. I can see those bo shuriken getting caught on things as you walked by, maybe even interfering with the deployment of the knife, so I’d probably find a better less snag-likely place to put them. And the same goes for the caltrops box. It’s a cool idea, but I think it would hinder any kind of low profile knife carry. It would also get relocated.

However the push dagger in the grip ois a nice touch, and I really do like the profile of the blade on this tanto. It has the traditional tanto profile, with a false edge which would give it a great combination of both cutting and thrusting ability. Pretty cool design. So, Do a little trimming and relocation of the sheath accessories, and Voila! A nice little ninja EDC kit.

Just the kind of thing any enterprising ninja might need.

Ninja Tanto battle set tool kit – [True Swords]

Yes. That is the question of the day. If old man Grim used and axe instead of a scythe, what would it look like? To be honest I have no clue. I just can’t imagine my O’l buddy Grim using anything other than a scythe. He’s really quite attached to that thing. They have some symbolic history together, something about harvesting souls or some other sappy poetic schmaltz.

Not my cup of tea, really, but he’s all about it. For a guy who spends a lot of time snatching the life right out of unsuspecting peeps at the drop of a hat, he always comes across as a bit of a tragic emo/goth. The perpetually covered face, the dark clothes, the endless angst, always carrying that blasted scythe around regardless of whether he’s actually on the clock or not… Meh. But I apologize. I ramble.

Back to the question at hand. If Mr. G. Reaper were to use an axe, what would it look like? Well, I still can’t say. I admit it. I have no imagination. Sue me. So instead I’m going to show you what some one else thinks it might look like. Allow me present the Grim Reaper Battle Axe:

Grim Reaper Battle Axe

Now this is an evil axe. Just the kind of thing I like. Big, crude, heavy, evil edges and lots of points and hooks and barbs and such, with but a token attempt at finesse. Just look at it. Not that Mr R. would ever use it, but you cannot possibly argue that this isn’t a an axe worthy of a reaper-type entity. Heck I’d use it, and reaping is just a hobby I indulge in part time when I’m bored.

What we have here is a huge, 51″ slab of solid, polished stainless steel. On one end a large almost medieval glaive-like double bladed axe head, complete with center spike. Coming down from the head, we have a leather wrapped grip, and then a short, but particularly nasty looking section of serrated blade. below that, we have another leather wrapped grip section, and below that we have a triple barbed hook, ending in a sharp, rather unforgiving looking, talon like point.

Now truth be told, I think the mechanics of this weapon are horrific. I mean, ergonomically speaking, you’d have to be a Klingon, or Vulcan, or have trained using a Bathleth or a Lirpa, or some similarly esoteric weapon, in order for this weapon to make sense. And that void/spike in the center really violates my sense of mechanical aesthetics. Why the huge void cut out of the center of the the Axe head? For weight reduction maybe?

And even then, why attach that point just above that by two really thin looking stems. It’s certainly a cool design feature, but it seems like it would be the first thing to break if subjected to any bending forces. And then, as if those weren’t enough, there’s a serrated blade in the very section of the weapon that your hand would be likely to slide into? I dunno ’bout all that. I would rather think most folks would like to keep their fingers. But that’s just my opinion.

It just seems to me that a person wielding this weapon would be cruisin’ for a bruisin’… Or didn’t really like their fingers very much. Which would be a shame. BUT on the other hand, every inch of this thing says “I mean business.” And by “business”, I mean “Bringing the pain”. Big time. So I’m on the fence. And unfortunately my old pal Mr. R has remained strangely silent on the issue. No surprise, I suppose, given that none of my concerns regarding self mutilation at the hands of this monstrosity would apply to him.

So what do you think? Is this… Axe Thing… (of ultimate evil) reaper material? Or not?

Grim Reaper Battle Axe – [North Star Collectibles]

Hi there folks… I’m back… With another entry from the “how to get yourself killed in an armed cage match” series. Today we have an interesting hand weapon that had so much potential… but ultimately failed in implementation.

Red Spiked Hand Claws w Knuckle Guards

[click image to view full size]

Yes, ladies and germs, allow me to present you with this (quite descriptively) named “Red Spiked Hand Claw With Knuckle Guards”. As it’s name suggests, this is a fairly menacing looking gauntlet thingy. Yes, in fact Sinza, had a thread over in our Exotic Automatic forums had a thread on this and we had a good laugh about it, (you can visit his site here: http://exoticautomatic.com ) but I suppose you’ll need some more details about why we found this so humorous. Well, I’d be happy to oblige.

But first, the basics.

We have what looks to be a large leather base panel, upon which is mounted a double skull laden cast metal emblem, with an recess in the back for a small red blade, with leather tassels attached. Never been a fan of the tassels, but I guess it the little red blade could have been intended for throwing, which would make the tassels have some practical functionality. But back to the weapon.

The leather base is adorned with a set of rivets in the rear, and a row of metal rings on either edge. It is fastened at the wrist by what looks like a band of nylon webbing. Ahead of the emblem and just above the knuckles we have a set of four metal skull medallions. And just after that, is where things begin to get interesting. The front of the leather panel splits into four fingers, and proceeds into a set of four spiked knucke guards, where it is riveted in place, both top and bottom.

Each knuckle guard has a very evil looking spike protruding from the center, at right angles to the guard, and each has ring, through which the fingers fit, which serves as the front attachment point for the gauntlet. And finally, the piece d’resistance, what makes this weapon cool (and also good for a laugh) are a set od deep red blades, attached to the cast metal emblem on the back of the leather base.

Now, we get to the fun (or at least humorous) part. While this design looks good/evil, (evil is good!!) it suffers from numerous rather painful ergonomic and mechanical flaws. I’ll start with the one that had sinza and I laughing. If you go to the link with the product page below, you will see there is a disclaimer.

This disclaimer warns that the coolblades atop the metal base are attached with, get this, GLUE, and is at risk of falling off should your pet kitten so much as sneeze in your general direction while wearing it. Ok, so they didn’t exactly say that. But they might as well have. Honestly who uses glue to attach metal parts to one another? So basically, you can’t subject it to hear, impact, stresses, vigorous motion, etc. Yeah. But they assure us, it’s no big deal, when it breaks you can just fix it using stronger glue…

HELLOOOOO… How ’bout at least suggesting some JB Weld, epoxy or something there bud? More glue? Seriously, that’s just wrong…

Anyway, that is not the end to the PHAIL that is the red spiked hand claw with knuckle guards. If you are in any way familiar with my past reviews of weapons of this type I’ve mentioned how important good anchoring is. This weapon designer would totally phail Phyreblades armblade anchor 101.

Notwithstanding that this leather base is entirely too flimsy for the job it has been tasked with, and that the metal attachement points do not seem sufficently reinforced to handle any kind of stress, (assuming the blades didn’t come off first) look at where the rings for your fingers to slide into those knuckle guards are. See where they are on the fingers in the pic?

Well, If you were to actually punch something with them like that, they would want to slide backwards. Back down and between the fingers. They would not stay up where they are right now. And it looks like there’s a good inch or so of play between where they are and where they are going to end up. What does that mean? No stability. Not good. At all.

And the base is going to go all cockeyed, because the wrist strap is way too close, and isn’t adjustable for length. In fact,  in this balrogs humble opinion, this would be worthless as a practical weapon. Unless you broke off one of the blades and used it to claw your opponents eyes out.  Maybe if you’re lucky and have long hands, the spikes might stay in the right position… But I wouldnt bet on that either…

At least it looks cool. If you’re the type of superficial person for whom looks are enough..

Hey I’m just saying…

Red Spiked Geriatric Battle Drome Hand Claw with Knuckle Guards – [True Swords]

I’m guessing it was while I wasn’t looking. During a movie. Resident Evil, to be specific. How do I know this? Because I just ran into a weapon that is supposedly from the movie RE, and I cannot, for the life (or brains) of me, remember anything remotely similar being in the movie…

Alice's Zombie Extinction Arm Spikes - AKA Zombie Killing Kunai

[click image to view full size]

Ok, so what are these? Well, to be honest, I haven’t the foggiest. Prolly on account of my brains being consumed and all. But I can certainly try to determine how they might be used…

So what these look like are a set of cast alloy spikes, with a faux Kunai four sided diamond like cross section. With a ring on top. Again like a kunai. What little is left of my brain is getting very suspicious.

Each side if the spike is cast with a rectangular parallelogram. Why? I dunno. But a pattern appears to be emerging. They are thick, low quality castings (like a Kunai) have a ring (like a kunai) come in multiples (Much like Kunai) and even have a leather wrist holster (Can anyone say “Ninja “?)

And to top it all off, I do not recall seeing anything like this in any of the Resident Evil movies… So here’s what I think the real story is. Some enterprising knife designer decided to design an “original” kunai. For some reason, they don’t sell. Then marketing hits on a brilliant idea:

Brand it as a weapon used by a popular (and pretty) protagonist (Alice), from a popular series of movies- Resident Evil. Voila! Alice now uses Kunai to kill Zombies… Alllllrighty then.

Any questions?

Alices Zombie Extinction Arm spikes Kunai – [True Swords]

I’m not really into politics, however it appears that the Good ‘ol U. S. of A. is going to have it’s first African American President. Now while that is of itself a noteworthy and landmark occurrence, as the transition from slavery to presidency is no mean feat, I’m also hoping it will bring with it important changes. Like an improved economy. Reduced national deficits. Better international relationships. You know. Good Presidential stuff.

However we will just have to wait and see. Politicians are politicians after all, it doesn’t matter whether they are black or white, which is a fact many seem to have forgotten. The proof is in the pudding. Whatever that means… I never really liked pudding anyway. Only time will tell how well campaign promises equate to results…

Anyway, in honor of this momentous occasion, I thought I’d break out a beauty of a weapon I ran into a while back. I have done a few gunblade posts in the past, but none of them compare to the sweetness that is the Gun Katar:

Gun Katar

[click image to view full size]

Is that not completely and uncompromisingly awesome? Now this is a weapon for which a Gun Kata would make practical sense. Yes, A Gun Kata. You know, that little gun dance that seemed to occur at random in the movie “Equilbrium”? The one with Christian Bale before he became the “Dark Knight? Yeah. That one. Go look up Gun Kata (not Katar) on the YouTubes or something. But I’m ranting here. Back to Gun Katar goodness.

What you are looking at here is a Katar, a traditional Indian punch dagger, primarily a thrusting  weapon, often designed to penetrate chain mail armored opponents. It has a thick wedge shaped blade, and unlike most other weapons, the blade is held vertically, by a grip and a set of side bars that sit at right angles to the blade.

Gun Katar - Side View

[click image to view full size]

This one is a particularly ornate one, featuring some very intricate engravings. You can see an elephant and a boar on one side, as well as flowers, leaves in the center area where the blade emerges, and other traditional Indian adornments.

Gun Katar - Engravings

[click image to view full size]

Gun Katar - Engravings

[click image to view full size]

Like many other katar, this features a double bar center grip, with the traditional side bars that run down either side of the blade and acts as guard as well as added support for the weapon.

Gun Katar - Side Guards

[click image to view full size]

Under normal circumstances, that would be the sum total of the design of a traditional Katar. Except this one takes quite a hike from the traditional beaten Katar path. This Katar is loaded. With black powder. A double charge no less…

Gun Katar - Flintlock Pistol Barrel

[click image to view full size]

This Katar is sporting a pair of flint lock pistols, one attached to either side of the weapon. If you look closely at the grip, you can see a pair of triggers recessed into the front bar, one at the top and one at the bottom.

Gun Katar - Flintlock Pistol Triggers

[click image to view full size]

As you can probably imagine, a person wielding this in battle would have a healthy advantage over your poorly equipped standard Katar wielding schlub. I can just imagine how confrontations with the original owner of this weapon would have ended. Indiana Jones style.

I love weapons that make the old saying: “never bring a knife to a gun fight.” redundant…

Anyway I thought this was a cool weapon for a special day… There are one or two more pics at the link after the jump. Here’s to great things in our future…

Peace!

Gun Katar – [CollectorEbooks.com]

Another day, another cool sword. Today, a sword suggested by reader Heero, the Sakabato (Reverse bladed Sword) of Himura Kenshin, key protagonist of the manga and anime series Rurouni Kenshin.

Himura Kenshin, was formerly a highly skilled assassin, called “Hitokiri Battōsai”. Hitokiri literally translates to “manslayer”. And while “Battōsai” has no direct meaning, there is a Japanese art called “Battōjutsu” which teaches the correct technique for drawing, cutting with, and sheathing a sword, much like Iaidō.

However while Iaidō deals primarily with the process of correctly drawing, cutting and sheathing techniques, Battōjutsu takes it a step further and teaches techniques for *multiple cuts* before resheathing. So together, the name “Hitokiri Battōsai” is perhaps one of the most ominous combinations you could ever have.

And the name was not undeserved. During his time as an assassin, Himura Kenshin he was considered an unbeatable warrior, killing many, many people, until one day he decides that he has done enough killing.

He becomes a rurouni, a renegade former assassin, who wanders the countryside helping people in trouble, to atone for his murderous past. Hence the name: Rurouni Kenshin. Once a rurouni, Kenshin meets a renowned Japanese swords smith called Arai Shakku, who has also decided to start making weapons for protection rather than killing, and it is he who gives the Sakabato to Kenshin.

I thought it was a cool, if a little cliched, story. The sword, however differentiates this from similar stories. I present Himura Kenshins Sakabato:

Himura Kenshins Sakabato

[click image to view full size]

From the intro pic, you can see that this is a beautiful, though not particularly noteworthy sword, except for one thing. The edge is on the inside of the curve of the blade, as opposed to the outside. This is a symbolic feature, intended to externally show that it’s wielder is a pacifist, and that the sword is not intended for lethal combat.

However the Sakabato poses a rather interesting structural question. The curve on a katana is a result of differential heat treatment, that makes the front edge of the blade hard, but leaves the spine flexible. During the tempering process, the front edge expands, while the spine does not, which results in the signature curve.

Thus a traditionally heat treated Sakabato is technically a rather complex feat. Since only the heat treated edge of a blade will expand, a sword would never curve in the direction of the edge, only away from it. So the only way a sakabato could be traditionally be made would be to forge an exaggerated reverse curve into the blade, *before* heat treating.

The curve would have to be enough to not only compensate for the resulting straightening that would occur during the heat treatment of the edge, but also still have enough curve left over for it to retain it’s signature Katana curve. It would take a very experienced smith to know exactly how much curve to forge into the blade.

Perhaps that was the point. Perhaps successfully pulling off a Sakabato was the signature of a master swordsmith, and made it the ultimate pacifists weapon. Hmm. That’s cool an all, but I could think of better solutions. Like don’t use a sword at all, just use something else. Like a Louisville slugger. Maybe in steel.

But that’s just my practical side speaking.

Anyway, cool plot lines and metallurgical complexities aside, this replica is actually one of the nicer ones I’ve seen in a long while. From the simple black circular tsuba, to the gold accent on the pommel, it is a very accurate, and very well put together, sword.

With quality fittings, real ray skin and cord wrapped tsuka, full tang carbon steel blade with dual mekugi, this is not only very well crafted, but a beautiful and sturdy design, intended to be dismantled and maintained in the traditional fashion:

Sakabato - Tsuka

[click image to view full size]

But while modern metallurgy might allow us to get away with a reverse bladed sword, without any of the mechanical hassles that would be associated with traditional metal working, I still would not advise any careless swinging of such a weapon. You never know, reverse blades may still have anomalous physical properties…

It might cut a hole in the fabric of space and time, and the tip may slice through, come out the other side and whack you in the back of the head. No, seriously, you gotta be careful with these kinds of things. Trust me, I’m a Balrog, I would know.

Hey, don’t roll your eyes at me, I’m just saying… K, fine. Suit yourself. Just make sure you bequeath your Sakabato to me in your will…

Yeah, It’s Phyreblade. P-H-Y-R…

What?

Himura Kenshins Sakabato – [True Swords]

I thought I’d post today about another “future axe” that I ran across a while back. Perhaps not as outlandish as the futuristic oval axe I posted about a while back, but still out there:

Futuristic Axe

This is supposedly a futuristic axe. Looks to me like a High Guard force lance with a blade attached to one end. (From the Sci-Fi series “Andromeda” for those who didn’t get the reference ). For some reason I can totally see Romy using this. Actually i’d love to see Romy use something like this. but I digress…

What we have here is a really fancy force lance looking shaft, to which is bolted/riveted a sleeve of some sort, atop which sits a rather flimsy looking slotted plate, to which an interestingly contoured blade has been riveted/bolted. Opposite the blade we have… Spines. Spikes. The guard from a hedge trimmer. I Dunno.

Anyway you probably already have a good idea about what I’m gonna say next. So I’ll summarize. Axe shaft: OK. Axe eye/cheek/sleeve assembly: rivet junk. Spines: Meh. Axe head… Well that I have to give them a little credit for that.

Yes, the way the axe head is attached to the shaft is junk. However the shape of the blade on this axe is another story. i actually found it rather interesting. It is formed of three straight edges on the front, and one curved one on the back, with two trapezoidal voids cut out of the middle of the blade.

The end result I found quite eye pleasing, with a sharp top point, and an inward canting straight blade out front.  Clearly, having no curves on the front edge of the axe, this would make for a bad general purpose axe design, and given the inherent weakness of it’s construction it might not even make a good combat axe, save for poking the playground bully’s eyes out with the spikes on it’s spine.

But from an aesthetic point of view, I kind of like it. What saddens me, however is that all of these so called futuristic axes have one thing in common: Iffy construction. Barring the possibility that the pommel of this weapon is a real live, honest to goodness force lance, If this is what weapon construction is reduced to in a few thousand years, well…

I weep for the future….

Futuristic Axe – [Anime Castle]

A while back, I had a reader ask for some information on Mughal period weaponry. Not knowing too much about it, I did some reading up and found that the Mughal period was a historic period in India that ran roughly from the 16th to 19th Century, where a large portion of the Indian subcontinent of Asia was ruled by Islamic Imperialists.

However I also quickly discovered that the Mughal period covered waaaay too much time and encompassed a large a geographical area that sported too many different but entirely indigenous weapon designs for me to single any specific one out. So due to my rather dwindling time resources, I wasn’t able to be much help (for which I apologize).

However during my travails, I did manage to turn up one rather unusual supposed example of Mughal weaponry:

The Sword of the Mughals

This sword features a damascus blade that starts out fairly straight, but curves mildly towards the tip into a rather wicked looking point. The spine of the sword follows suit, except for the top third, which looks a lot like it was cut down from a much larger, wider deeply curved scimitar.

The hilt is also unusual for a Persian blade, featuring no cross guard, and almost straight grip, but a reverse curving pommel, molded into the head of a stallion. Overall an interesting (if a little perplexing) study in Persian weapon design.

This blade is an interesting mix of flavors, part scimitar, part broadsword, with an unusual hilt design. The weapon, as a whole seems to match little of the historical weapon patterns of the area that I’m aware of, but instead seems to be a variation of a mix of different Persian weapon styles that have themselves been modified.

As an example of Mughal style weaponry, I must admit to being a bit flummoxed by the design. Most of the authentic historical weapons I came across when I was doing my initial research on the topic, bore significant differences in design.

I’m tempted to say this is another fanciful but failed attempt by an overzealous weapon designer to create a historical Mughal blade with generous helpings of creative license thrown into the design process. But being no expert in Mughal specific blades, who knows…

But no matter. It does not look bad on it’s own merits, even if it’s just a little too tame by my standards…

The Sword of the Mughals – [Realm Collections]

Yes, yes, another “ninja” weapon, I know. And it’s another “inspired by an anime” weapon too… But trust me, this one is different. This blade is actually realistic (of all things!) in it’s design. Yep. Lots to like about this, as you’ll see in a minute. Might want to grab that cuppa joe and get comfortable…

Ninja Fighter

[click image to view full size]

Now this, my friends, is a Ninja fighting knife. What we have here is a one piece brass knuckles/blade combination, with cord wrapped ABS grips, that house a pair of red tassled metal kunai. A very interesting and also very practical (imho) combination.

There are a couple of things that I have issues with, (as usual) but they are all relatively minor. Like bright red tassels and “metal” kunai… Usually the word “metal”, as used in the cultery advertising sense, generally describes some cheap cast/alloy junk.

In this day and age where fairly strong steels can be had very cheaply, why some folks still resort to the ultra cheap cast/alloy junk is beyond me. However seeing as traditional Kunai were traditionally also made of a soft iron, It’s a flaw that I can kind of overlook…

Aaaahhh… Eeerrrm… Aaarrhg… No it’s not. I tried. That’s just wrong yo… >:(

Then there is the molded ABS grip/kunai holder. As materials go, ABS is actually not a bad choice. It’s fairly indestructible, resistant to the environment, etc. However, sometimes the molds used are less than perfect, resulting in gaps, slipping, etc.

And since this is where your only purchase on the blade will be I sincerely hope they did a good job on it. It’s hard to tell from the looks of it, but personally, I think this weapon would have been even better, if they would have stuck to a simple cord wrapped grip or wood scales.

And as for those red tasseled “metal” Kunai… Well, it’s just eye candy really, this weapon could have stood on it’s own merits of dark wickedness and badassitude. There was really no reason to throw all that fancy schmancy junk on it to begin with. But such it is with knife designers these days. Always trying to appease “Ooooh ! Shiny!” crowd…

Interestingly enough, this weapon is based on a set of blades used in the anime Series “Naruto” by the character “Sarutobi Asuma”, son of the Third Hokage, and a seasoned, hard core, chain smoking Ninja of the series, who used two of these, (knives akimbo no less, John Woo eat your heart out…), as focus points for his chi during battle, making them quite a lot more deadly than just regular blades.

Sarutobi Asuma

I remember liking his knives the first time I saw them in the series, and could remember thinking at the time about the similarities between it and the venerable, tried and true WWII trench knife design. Yes, this design is the bees knees because not only is it a wicked little blade, (in black no less) it is actually very similar to that of a well known historical blade design. Except with more pointy bits. In other words… it rocks!!

I will say however, that the shrill voiced, high pitched little weapon history nerd who lives in my head, kept screeching his exception to my comparison between this and the WWII trench knife. He as a good point, so I guess I might as well go over the gist of our little “conversation” the few minutes before I lost it and had to gag him…

He basically said (and the purist, tradition bound Ninjutstu-ka among you may probably agree) “Bah! Your brain is addled! Ninja never used WWII trench knives!!”. (Well, Duuuuuh!) After pointing out that he lived there, so I couldn’t be that addled, (or maybe I am, because he lives there) I also conceded that no, they did not. At least not that I have been able to find.

HOWEVER, the Japanese did have hand weapons, called Tekken, (or Iron fist) that looked a lot like heavy iron knuckle dusters, that were often used against swords and armor. They also had Kaiken, which were similar, except for having a sharpened outer edge. And they also had Tantos.

So while I have found no examples of this exact weapons being used, I have no problems imagining that the Shinobi, being the resourceful little warriors they were, would have eventually combined these weapons and could easily have come up with this exact design, given the right battle conditions.

So there you have it. An cool black wicked looking anime weapon with a realistic, functional, tried and true design, with a historically verifiable pedigree. Sorta.

Ah liek eht. Ah liek eht a lot…

Ninja Fighter – [True Swords]

There are some weapon designs that are actually very cool (and arguably equally wicked) in concept, but really fall short of their potential in design and implementation. I came across one such evil seed a while back, and thought I’d post about it…

Skull Mayhem

[Click image to view full size]

Now this right here, is what I call a hand blade. And it’s pretty self explanatory. It wants to kill you. No. really. It does. And for this reason, it features a not so obvious but rather dangerous design detail, which we’ll get to in a minute. But on to the wickedness.

In essence, this is pretty much a metallic demon/vampire skull, (personally I’d go with “Angry Master Demon Vamp” But that’s just me) with a set of three pairs of blades attached to it, coming out at either side of the skull, and beneath a very wicked looking set of teeth. The largest, topmost set consists of a large curving blade with quadruple edges, one on the top half of each inward curving blade and the other edge on the bottom half.

The single round grip is attached to a bracket that is bolted to each primary blades on either side. Beneath the main blades are a set of smaller, but longer and more sinister looking blades extending downwards and inwards from approximately where the skulls mandibles should be. IMHO the coolest blades of the set.

The last pair of blades sit in between the second set, and extend downwards from the teeth, specifically from the large fangs, forming a long and rather formidable looking set of black steel fang extensions. Given the reach of the middle pair of blades, I doubt the smaller pair are really neccesary, but I certainly can’t argue the evilitude of the whole combination…

Altogether this would make for a rather effective hand held battledrome blade, except for that one, rather nasty little caveat, that I alluded to earlier. The grip. Yes. This weapon seems very well put together, with a grip set in a steel bracket that is bolted quite securely to the largest set of blades. BUT this single grip is where the problem lies.

With a single grip, this whole contraption is capable of freely rotating around (forwards and backwards, to be exact) the grip. Which means on one day you may have the top of the skull trying to attach itself permanently to the back of your hand. And on another day, you could have the bottom blades trying to slit your wrists.

Either way, unless you’re an emo looking for a really cool way to go out, this is probably a bad choice of weapon for the underground deathmatch gladiator type. However, I do like the aesthetics of this piece. Large black blades, fangs, bladed skull wings… Awesome. And had someone had the forethought to place a rear wrist brace/bracket on the thing, it might have been an absolutely unholy terror in the death match circuit…

Perhaps that was the whole point. Maybe the designers were scared. Maybe they gimped it because they were terrified of what their creation might become. Frightened pantless that their creation might come back to eviscerate them…

Pffft… BWAHA HA HA HA HA AH HA HHA HA HA…

Wusses…

Skull Mayhem – [Collectors Edge]